Home > Products > Insulation Sheet
Pipe insulation Pipe insulation
Insulation Sheet Insulation Sheet
Insulation Tape Insulation Tape
Foam Grips Foam Grips
Foam roller pads Foam roller pads

Insulation Sheet/

Indroduction
 

CENTURYLON AP-702 Insulation Sheet

  CENTURYLON AP-702 Insulation Sheet is a flexible Closed Cell insulation sheet . It is available in 36" x 48" standard sheet size 1/8" to 1" max thickness. It is particularly adaptable to insulating large pipes, ducts, thanks and vessels.

Application to large pipes

Apply CENTURYLON AP-702 insulation Sheet on pipes larger than 5" IPS. Cut the sheet in proper size, allowing it to fit around the pipe in a relaxed state. Brush a thin, even coat of adhesive on the surfaces of both edges. After drying, warp the sheet around the pipe and join firmly together by pressure.

 

Application to metal ducts surfaces

Brush ( or roll ) a coating of adhesive on both surfaces of metal duct and CENTURYLON AP-702 insulation Sheet , leaving a 1/2" wide uncoated border of insulation sheet. After drying, place the sheet so that it overlaps the edges of previously installed sheet by 1/8". Spot-adhere it in the center and compress the butt edges into place. Then bond the remainder of the sheet by pressing. Spread the joint, and with a small brush apply adhesive to both butt edges, and compress the joint.

Application to fittings

By the use of templates, fitting covers are easily made for screw fittings 2", 2-1/2", and 3" long-radius weld fittings from 3" to 10" IPS. Apply adhesive to the inner arc joint, the pipe-section butt surface and the fitting cover butt surface. After drying, bonding together.
 

Recommended Thickness Of CENTURYLON Ap-702 Insulation Sheet On Cooling Lines

Indoor Contitions Ducts-Tanks-Vessels-Equipment Metal-Surface Temperature
15°C (59°F) 12°C (53.6°F) 7°C (44.6°F) 2.5°C (36.5°F) -16°C (3.2°F)

29.4°C(85°F)
70%RH

1/4" 3/8" 2/1" 5/8" 1-1/8"
26.7°C(80°F)
50%RH
1/8" 1/8" 1/4" 1/4" 1/2"
32.2°C(90°F)
80%RH
5/8" 3/4" 1" 1-1/4" 2"